• Load the configuration file in "Cura" to print an object using the corresponding material (see "e) Loading configuration
files (Windows
)" on page 52 for details).
®
The contents of this folder are not displayed on the control panel. These config files are recommended for
use with the supplied filaments. You can also use "Cura" to create your own configuration files.
c) Operating instructions
• The quick start guide is saved to the "Manual" folder.
The contents of this folder are not displayed on the control panel.
d) Software
• The "Software" folder contains the Windows
necessary USB drivers.
The contents of this folder are not displayed on the control panel.
6. Features and functions
• Fully assembled and ready-to-use 3D printer
• Max. size of the printed object: 200 x 200 x 200 mm
• High-precision extruder with 0.4 mm nozzle
• Colour touchscreen control panel
• Works with a computer (via USB) or an SD card/USB stick
• Supports printing from an SD card, PC and USB stick
• Manually-configurable printer parameters
• Extremely stable metal design
• Suitable for 1.75 mm PLA, wood, copper, elastic, glow-in-the-dark and thermocolour filaments (for item no.
1592620, 1592461) and ABS filaments (for item no. 1592461)
• Over 100 ready-to-use 3D models
• Includes "Cura" software
and Mac OS installation files for the "Cura" software and the
®
7