E) Configuring Parameters During The Printing Process; F) Restarting The 3D Printer - Renkforce RF100 XL Operating Instructions Manual

e) Configuring parameters during the printing process

Only recommended for experienced users.
• Go to the < Option > menu and select < Printing > to set the print speed, nozzle/hot plate temperature and fan/
filament loading speed.
Print speed: Observe the printing process and adjust the print speed accordingly. The print speed affects
the print quality for certain objects and filaments. For example, if the print speed is too high, the printed
object may not adhere properly to the print bed.
Nozzle temperature: Do not use the nozzle continuously at 260 °C. Continuously operating the printer
at temperatures above 260 °C significantly reduces the life span of the extruder. Allow the printer to cool
down before using it again.
Hot plate temperature (order no. 1592461): Adjust the hot plate temperature when printing objects with
ABS.
Flow (load speed of the filament in the extruder): Observe the printing process and adjust the speed
accordingly. If the speed is too high, the nozzle may become blocked.
Fan speed for cooling the printed object: Let the object cool down for a few minutes when it has finished
printing. If the object is not easy to remove, carefully detach it using the scraper.
The fan speed for cooling the motor cannot be set manually. The fan turns off automatically when the
nozzle temperature reaches 40 °C.
Stopping the printing process
• To stop printing, go to the < Printing > menu and select < Stop >. It may take several seconds for the 3D printer to
come to a complete standstill.
• The nozzle will return to its initial position and the print bed will move downwards. The nozzle will start to cool down.

f) Restarting the 3D printer

• Restart the 3D printer in the following scenarios:
- If incorrect/no information is displayed on the colour touchscreen display.
- If the 3D printer does not work properly.
• If a USB cable is connected, unplug it from the printer.
• Switch the 3D printer off. Wait for a moment and turn it back on. You can now use the printer as normal.
38