B) Printing From A Usb Stick - Renkforce RF100 XL Operating Instructions Manual

5
• Select < 115200 > to control the 3D printer via
the control panel.

b) Printing from a USB stick

By default, the printing source is set to the SD card. If you want to print from a USB stick, follow the steps below.
1
• Go to the < ReadyPrint > menu and select
< Setting >.
3
• Select < USB Drive > as the print source.
2
• Select < USB Settings >.
4
• Go back to the < Set > menu and select < Select
Source >.
35