D) Pausing The Printing Process - Renkforce RF100 XL Operating Instructions Manual

3
• Touch < OK > to confirm.
5
• Let the object cool down for a few minutes
when it has finished printing.
• Remove the print bed (if necessary) and
carefully remove the printed object with the
scraper.

d) Pausing the printing process

The nozzle continues to heat when printing is paused. Only pause printing for short periods, otherwise the
nozzle may overheat and become blocked.
• Go to the < Printing > menu and select <Pause >.
• To continue printing, select < Resume >.
4
• < Printing > will appear on the touchscreen
display.
• The print bed will move towards zero along
the Z-axis. The nozzle will move to the starting
position and start to heat up.
• Printing will start when the target temperature
(e.g. 210 °C) has been reached.
• The printing progress is displayed in percent.
37