Control Panel; A) General Functions - Renkforce RF100 XL Operating Instructions Manual

7
• Connect the mains cable to the power adapter,
and then connect the power cable to the 3D
printer.
• Plug the mains plug on the power cable into a
mains socket.
• Move the on/off switch to the I position to switch
the 3D printer on.

12. Control panel

• The following explanations apply to printer firmware V2.1. Newer versions may have different functions.
• The 3D printer can be controlled using the control panel on the colour touchscreen display.
• Some options are highlighted in yellow after confirmation.
The hot plate settings only apply to the RF100 XL Plus (item no. 1592461).

a) General functions

Icon Menu option Function
< Add >
< Dec >
< Back >
16
Increase the corresponding value.
Decrease the corresponding value.
Return to the previous menu.
8
• The printer light will turn on.
• < ReadyPrint > will appear on the touchscreen
display.
The 3D printer is now ready for use.