Intended Use; Package Contents - Renkforce RF100 XL Operating Instructions Manual

3. Intended use

The 3D printer is shipped pre-assembled and ready to use. It can be controlled with the computer software provided
or the built-in touchscreen colour display. It features a powder-coated metal housing to ensure a long lifespan. The
printer can print objects up to a size of 200 x 200 x 200 mm and comes with bright built-in LEDs that enable you to
monitor the printing progress. The SD card comes with 100 preset 3D models that can be printed in a few mouse
clicks.
The 3D printer must be connected to a standard mains socket (100–240 V/AC, 50/60 Hz). It is intended for private
use only.
The printer is intended for indoor use only. Contact with moisture (e.g. in bathrooms) must be avoided under all
circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for purposes
other than those described above may damage the product. Improper use may lead to short circuits, fire, electric
shocks or other hazards. Read the instructions carefully and store them in a safe place. Always provide these
instructions when giving the product to a third party.
All company and product names are trademarks of their respective owners. All rights reserved.
Up-to-date operating instructions, 3D model files and configuration files
To download the latest operating instructions, 3D model files and configuration files, visit www.conrad.com/downloads
or scan the QR code on this page. Follow the instructions on the website.

4. Package contents

• Fully-assembled 3D printer
• 250 g original Renkforce PLA filament (1.75 mm,
white)
• 8 GB SD card with "Cura" software, 100+ ready-to-
print 3D model files
• Power adapter
• Mains cable
• Quick start guide (in German and English)
• Filament spool holder
• Filament tube
• USB cable
• Scraper
• Tweezers
• Side cutters
• 2.0 mm hex key
• 2.5 mm hex key
• 2x screws to secure the filament spool holder
• Glass print bed with pre-installed print bed film (with
item no. 1592620)
- Includes hot plate and blue tape (with item no.
1592461)
• 5 x original Renkforce filament samples (copper, wood,
glow-in-the-dark, colour-change and elastic, 1.75 mm
/ 50 g)
• 50 g ABS filament (1.75 mm, black) (with item no.
1592461)
5