Operation At The Printer; A) Display And Operating Buttons - Renkforce RF500 Maker Construction Kit Operating Instructions Manual

14. Operation at the Printer

a) Display and Operating Buttons

1
2
3
4
9
(1) Temperature extruder (target)
The target temperature it not displayed here yet, since the ex-
truder is not heated yet.
(2) Temperature extruder (actual)
(3) Printing speed
(4) Status information
(5) Status of the heating bed (optional)
(6) Status of the extruder fan; when it runs, the current
speed in % is displayed below.
(7) Status and position of the 3 axes X, Y and Z; indication in mm
(8) Status of the SD card
(9) Setting controller for the display contrast
(adjustable with a narrow flat-head screwdriver)
(10) Operating knob with button
Turn to the left/right: Direction navigation in the menu structure;
Setting the temperature, positions
Button: To confirm a selection in the menu
(11) Reset button: Restarts the printer
90
5
6
7
8
10
11