e) Loading configuration files (Windows
• You can load a preset configuration file for your filament from the SD card to simplify the printing process. These
configuration files are also available to download from www.conrad.com.
1 Click "File".
2 Select "Open Profile ...".
3 Select the desired filament configuration file from the pop-up window and confirm your selection.
The configuration files are saved to the SD card in the "Config" folder. Alternatively, you can skip this step
and configure the settings from the previous section (see "d) Software settings (Windows
for details).
f) Loading configuration files (Mac OS)
• Configuration files for Mac OS are not included on the SD card.
• These configuration files are available for download from www.conrad.com/downloads.
• Copy the files to your computer.
• Load the configuration files by repeating the steps in "c) Setting up the software (Mac OS)" on page 44.
Ensure that the downloaded configuration files start with "RF100 XL-xxx" or "RF100 XL Plus-xxx". Only
these files are compatible with Mac OS. Files that start with "Config-xxx" are only compatible with
Windows
.
®
52
)
®
1
2
)" on page 48
®