Printing; Printing From Usb Memory Stick; Printing From Computer Via Usb Cable; Printing From Computer Via Wi-Fi Connection - Renkforce FDM 3D Printer Pro 6+ Operating Instructions Manual

12 Printing

12.1 Printing from USB memory stick

1. Save the print file that contains the model to the supplied USB memory stick.
2. Connect the USB memory stick to the USB-A port on the printer.
3. Select the print file from the print menu.
4. Print the file.
The printer will sound an alarm after printing is complete.
Æ
5. After printing is complete, flip the power switch into the position 0.
6. Let the printer cool down to room temperature.

12.2 Printing from computer via USB cable

After connecting the computer to the printer via USB cable, you can print 3D models
directly from the slicing software (example: Ultimate Cura).
1. Connect the USB cable to the USB-B port on the printer.
2. Connect the USB cable to a USB port on the computer.
3. Start the print job in the slicing software.
The printer will sound an alarm after printing is complete.
Æ
4. After printing is complete, flip the power switch into the position 0.
5. Let the printer cool down to room temperature.

12.3 Printing from computer via Wi-Fi connection

After connecting the printer to the Wi-Fi network, you can print 3D models directly from
the slicing software (example: Ultimate Cura).
1. Setup the desired Wi-Fi connection by following the software instructions on the
supplied USB memory stick.
2. Start the print job in the slicing software.
The printer will sound an alarm after printing is complete.
Æ
3. After printing is complete, flip the power switch into the position 0.
4. Let the printer cool down to room temperature.
20

12.4 Removing printed models

CAUTION
Hot print bed
Touching hot print bed can cause burns
Let cool down before touching
1. Flip the power switch into the position 0.
2. Let the printer cool down to room temperature.
3. Remove the magnetic mat with the printed object.