Logo Description Programming - Sam4s ER-420 Series Operation And Program Manual

Logo Description Programming

Programming the Receipt/Check Endorsement Message
A preamble message of up to six lines can be printed at the top of each receipt; a postamble message
of up to six lines can be printed at the bottom of each receipt: an endorsement message of up to ten
lines can be printed when a check is endorsed on an optional slip printer. Each line can consist of up
to 24 characters.
ER420 Series
1. Turn the control lock to the P position.
2. To begin the program, enter 7 0 0, press the SBTL key.
7 0 0
3. Refer to the chart below and enter the number that represents the line you wish
to program; press the X/TIME key.
X X/TIME
X Message Line
st
1 1 line of Preamble
nd
2 2 line of Preamble
rd
3 3 line of Preamble
th
4 4 line of Preamble
th
5 5 line of Preamble
th
6 6 line of Preamble
st
7 1 line of Postamble
nd
8 2 line of Postamble
rd
9 3 line of Postamble
th
10 4 line of Postamble
th
11 5 line of Postamble
4. If you are programming
Type up to 24
descriptor keys
or,
Enter up to 24
three-character
codes
5. Press the CASH key to finalize the program.
CASH
SBTL
X Message Line
th
12 6
st
13 1
nd
14 2
rd
15 3
th
16 4
th
17 5
th
18 6
th
19 7
th
20 8
th
21 9
th
22 10
SBTL
SBTL
line of Postamble
line of Endorsement
line of Endorsement
line of Endorsement
line of Endorsement
line of Endorsement
line of Endorsement
line of Endorsement
line of Endorsement
line of Endorsement
line of Endorsement
Program Mode Programming • 147