Standard Connection For Porting Programs From Sinec L1 To Sinec L2; Plc-To-Plc Connection Between An Active Cp 5430 And An Active S5-95U; Cyclic I/O Between An Active Cp 5430 And A Passive S5-95U - Siemens SIMATIC S5 Manual

S5-95U, SINEC L2
Standard connection (SC)
To be recommended only if existing programs are to be ported from SINEC L1 to SINEC L2.
Active
stations
Bus
Passive
stations
Figure 1-10. Standard Connection for Porting Programs from SINEC L1 to SINEC L2
2. Communications between an S5-95U and a Device of Other Manufacture
(station that is not an S5-95U)
PLC-to-PLC connection
Active
stations
Bus
Passive
stations
Figure 1-11. PLC-to-PLC Connection between an Active CP 5430 and an Active S5-95U
Cyclic I/O (ZP)
Active
stations
Bus
Passive
stations
Figure 1-12. Cyclic I/O between an Active CP 5430 and a Passive S5-95U
EWA 4NEB 812 6112-02
SC
S5-95U
PLC-PLC
CP 5430
CP 5430
ZP
S5-95U
S5-95U
S5-95U
System Description
1-19