Siemens SIMATIC S5 Manual page 9

Preface
Conventions
The "S5-90U/S5-95U System Manual" and the SINEC L2 Manual - Interface of the S5-95U
Programmable Controller" observe the same conventions.
All the conventions listed at the beginning of the System Manual apply also to this manual. Please
refer to that Manual. Your attention is also drawn to the "Safety-Related Guidelines for the User" on
page xi at the end of this chapter.
Courses
Siemens offer a wide range of training courses for SINEC users.
For more information, please contact
• Informations- und Trainings-Center für Automatisierungstechnik
AUT 959 Kursbüro
Postfach 21 12 62
76181 Karlsruhe
Federal Republic of Germany
Tel.: (Nat. access code) 721 595-2917
or
• Your nearest Siemens representative
Reference Material
This manual contains a comprehensive description of the SINEC L2 interface of the S5-95U
programmable controller. The following manuals etc. contain more detailed information on topics that
are handled only briefly here:
SINEC L2 Local Area Network
CP 5430
Order No. 6GK1 970-5AA00-0AA0
SINEC
L2/L2F0 Manual
Order No. 6GK1 970-5CA00-0AA0
Installation Guidelines:
Installing the SINEC L2 Local Area Network
Order No. AR 463-2-220
PROFIBUS Standard (DIN 19245)
Beuth-Verlag; Berlin 1988
Bender, Klaus: Profibus
Hauser-Verlag; Munich 1990
Kafka, Gerhard: Grundlagen der Datenkommunikation;
Datacom-Fachbuchreihe; Pulheim 1989.
(available in German only)
Stöttinger, Klaus H.: Das OSI-Referenzmodell;
Datacom-Fachbuchreihe; Pullheim 1989.
(available in German only)
There are correction forms at the end of this manual. Please use them to indicate any corrections,
additions or suggestions you might have in the way of improvement that will benefit the next edition
of the manual.
x
S5-95U, SINEC L2
EWA 4NEB 812 6112-02a