Siemens SIMATIC S5 Manual page 182

S5-95U, SINEC L2
The screen changes to the following:
SINEC L2
F1
ENDP
Change the default address "0" in the entry field beside the symbol for CP-L2 to "2" in order to
reach the S5-95U with the station address 2.
Press <F1> (ENDP) to complete the path.
Confirm the path parameters with <F6> (SAVE).
You have now completed and stored the path. You must now activate the subpath from the PG/CP-
L2 to the L2 LAN to set the CP-L2's LAN parameters in the programmer.
EWA 4NEB 812 6112-02
PG/CP-L2
CP-L2
F2 F3 F4
COOR/
MUX CP-L2
Figure 9-5. Screen for Editing a Path (2)
Programmer Functions Over the SINEC L2 Network
PATH NAME :ST 2/95U
ADDRESS : 0
F5 F6
DELETE
CP-L1 SAVE ELEMENT
F7 F8
AUX.
FUNCTION
9-7