Defining The Arguments Of The Basic Parameters For The S5-95U In Conjunction With The Cp 5410 And/Or Cp 5430-1; Basic Parameter Arguments For The S5-95U In Conjunction With Other Simatic Devices - Siemens SIMATIC S5 Manual

System Description
Communications with the CP 5410 and/or CP 5430-1
You must set the same basic parameters BDR, SET, ST, SDT 1 and SDT 2 for the S5-95U, CP
5410 and CP 5430-1.
Define the arguments of the BDR, SET, ST, SDT 1 and SDT 2 basic parameters as shown in Table
1-4:
• for the S5-95U in DB1
• for the CP 5410
• for the CP 5430-1
Table 1-4. Defining the Arguments of the Basic Parameters for the S5-95U in Conjunction
Baud rate
Basic in kbaud
parameters
in bit time units
SET
ST
SDT 1
SDT 2
Example: Define the baud rate as 187.5 kbaud in DB1. This gives the other basic parameters
as follows: SET 1
Communications with Other SIMATIC Devices, e.g. the CP 5412 or CP 5430-0
You must set the same basic parameters BDR, SET, ST, SDT 1 and SDT 2 for the S5-95U and the
other SIMATIC device.
Define the arguments of the BDR, SET, ST, SDT 1 and SDT 2 basic parameters as shown in Table
1-5:
• for the S5-95U in DB1
• for the other SIMATIC device
Table 1-5. Basic Parameter Arguments for the S5-95U in Conjunction with
Baud rate
Basic in kbaud
parameters
in bit time units
SET
ST
SDT 1
SDT 2
Example: Define the baud rate as 187.5 kbaud in DB1. This gives the other basic parameters
as follows: SET 80
1-12
with the CP 5410 and/or CP 5430-1
9.6 19.2
1 1
80 80
12 12
40 60
ST 380 SDT 1 12
Other SIMATIC Devices
9.6 19.2
10 15
100 170
12 15
60 65
ST 400 SDT 1 80
93.75 187.5
1 1
190 380
12 12
80 150
SDT 2 150.
93.75 187.5
45 80
45
240 400
45 80
200 360
SDT 2 360.
S5-95U, SINEC L2
500 1500
1 60
1000 3600
12 150
360 980
500 1500
80 80
1000 3000
80 150
360 980
EWA 4NEB 812 6112-02