Entering Defaults - Siemens SIMATIC S5 Manual

Programmer Functions Over the SINEC L2 Network
9.3

Entering Defaults

When you have confirmed your choice of interface, the "PACKAGE SELECTION" screen appears
again.
Select the "FUNCTION SELECTION/DEFAULTS" screen with <F2> (UTILITY) and <F1>
(BUS DIALLING).
Choose a name for the path you want to generate (e.g. "TN2/95PLC" for the S5-95U with
station address 2 as endpoint of the path).
Choose names for the pathfile (e.g. C:TEST@@AP.INI), the footer file (if you want a footer) and
the printer file (if you have defined printer parameters for the printer with the "PRINTER" utility).
F U N C T I O N
PATHFILE
FOOTER
F1
EDIT
Figure 9-2. The "FUNCTION SELECTION/DEFAULTS" Screen of the "BUS DIALLING" Utility
Press <F1> (EDIT) to generate the path.
9-4
S E L E C T I O N / D E F A U L T S
: ST 2/95U
: NO
F2 F3 F4
PRINT SELECT ACTIVATE
SIMATIC S5 / ODS01
PATHFILE: B:TEST@@AP.INI
FOOTER FILE: B:@@@@@@F1.INI
PRINTER FILE: B:@@@@@@DR.INI
SELECTED INTERFACE :
ACTIVE INTERFACE :
F5 F6
PATH
DIS-
DELETE
CONN.
S5-95U, SINEC L2
CP L2
CP L2
F7 F8
DIR EXIT
EWA 4NEB 812 6112-02