B.2.2 Db1 Parameters Of S5-95U - Siemens SIMATIC S5-90U System Manual

Technical Specifications, DB1 Parameters, RAM Address Assignment
B.2.2 DB1 Parameters of S5-95U
Parameter
Block ID: OBA:
AI
p = 0 to 8
Block ID: OBI:
IP
IN
IPN
INP
p = 0 to 3
Block ID: OBC:
CAP
CBP
CAN
CBN
CCP
CCN
p = 0 to 65536
Block ID: SL1:
SLN
SF
EF
KBE
KBS
PGN
p = 1 to 30
Block ID:SDP:
NT
PBUS
p = 0 to128
Block ID: TFB:
OB13
p = 0 to 655350 (in 10 ms steps; p=0 means: time-controlled program execution not possible)
B-6
Argument
p Number of analog inputs read in cyclically
p Interrupt, positive edge, channel p
p Interrupt, negative edge, channel p
p Interrupt, positive and negative edge, channel p
p Interrupt, negative and positive edge, channel p
p/N Counter A, positive edge,
p/N Counter B, positive edge,
p/N CounterA, negative edge,
p/N Counter B, negative edge,
q/N Cascaded counter, positive edge,
comparison value q
q/N Cascaded counter, negative edge,
comparison value q
q = 0 to 4 294 967 296
p Slave number
Location of Send Mailbox
DBx DWy Location of Receive Mailbox
or MBy Location of Coordination Byte "Receive"
Location of Coordination Byte "Send"
p Programmer bus number
x = 2 to 255
p Number of timers being processed
J/Y/N Start-up only via connected bus units
j/J/y/Y = yes
p Intervals (ms) at which OB 13 is called up and is
processed
Explanation
Onboard Analog Inputs
0 = no analog channel read in
Onboard Interrupt
Onboard Counter
comparison value p
comparison value p
comparison value p
comparison value p
N/n = not activated
SINEC L1
y = 0 to 255
System Dependent Parameter
n/N = no
Timer Function Block
EWA 4NEB 812 6115-02b
S5-90U/S5-95U