Parameters With Index, With Or Without Direct Display; Example Of Parameter 701 (Actual Error) On The Service Level - Siemens LME39 Series Basic Documentation

P
P
P
To the next index
P
Building Technologies Division
20.3 Parameters with index, with or without
direct display
20.3.1 Example of parameter 701 (actual error) on the service
level
Refer to chapter Error code list!
V h min s %
V h min s %
V h min s %
V h min s %
Basic Documentation LME39...
20 Operating variants of the parameters
to select parameter 701.
Press
Display: Parameter 701. flashes, index 01: and error
code 4 do not.
On the left, the current error 701. appears flashing, index
01: does not flash.
On the right, error code 4 is displayed.
Example:
Parameter 701., index 01:, error code 4
/reset
1...3 s
for 1...3 seconds to show index 01: for the
Press
/reset
error code flashing.
Display: Parameter 701. does not flash, index 01: flashes,
error code 4 does not flash.
Press to select the index.
.01 = error code
.02 = diagnostic code
Example:
Parameter 701., index 02:, diagnostic code ._._
/reset
1...3 s
63/73
CC1P7106en
08.12.2017