Usb 10 & 11 (J9); Usb 4&5 (J10) - Kontron KTQM87/mITX User Manual

KTD-N0886-E
USB 10 & 11 (J9)
The USB ports 10 and 11 supports USB2.0, are located in the stacked rear IO connectors J9 with LAN1.
Note Type
1 PWR
PWR
1 PWR
PWR
Signal Description
USB10+ USB10-
Differential pair works as serial differential receive/transmit data lines.
USB11+ USB11-
5V supply for external devices. SB5V is supplied during power-down to allow wakeup
5V/SB5V
on USB device activity. Protected by resettable 2A fuse covering both USB ports.
USB 4&5 (J10)
The USB ports 4 and 5 supports USB2.0, are located in the stacked rear IO connectors J10 with LAN2.
Note Type
1 PWR
PWR
1 PWR
PWR
Signal Description
USB4+ USB4-
Differential pair works as serial differential receive/transmit data lines.
USB5+ USB5-
5V supply for external devices. SB5V is supplied during power-down to allow wakeup
5V/SB5V
on USB device activity. Protected by resettable 2A fuse covering both USB ports.
Page 28
Signal
IO USB10- USB10+
5V/SB5V 1
IO USB11- USB11+
5V/SB5V 1
Signal
IO USB4- USB4+
5V/SB5V 1
IO USB5- USB5+
5V/SB5V 1
KTQM87/mITX Users Guide
PIN Signal Type
2 3 4 GND PWR
GND
2 3 4 GND PWR
GND
PIN Signal Type
2 3 4 GND PWR
GND
2 3 4 GND PWR
GND
IO-Area Connectors
Note
IO
IO
Note
IO
IO