Kontron KTQM87/mITX User Manual page 61

KTD-N0886-E
Processor Power Management
Advanced
Processor Power Management
Intel ® SpeedStep ™
Boot Performance Mode
Turbo Mode
Turbo Mode Power Limit Lock
Long Power Limit
Long Power Limit Time
Short Power Limit
Short Duration Turbo mode
Energy Efficient Enable
Configure TDP Boot Mode
Lock TDP Setting
TDP Custom Setting
C-States
Extend C-States
C3-State
C6-State
C6 Latency
C7-State
C7 Latency
C-State Auto Demotion
C-State UnDemotion
Package C State Demotion
Package C State UnDemotion
C State Pre-Wake
Lake Tiny
F1 Help ↑↓
Esc Exit ←→
Function
Intel ® SpeedStep ™
Boot Performance Mode
Turbo Mode
Turbo Mode Power Limit Lock
Long Power Limit
Page 59
Phoenix SecureCore Technology Setup
[Enabled]
[Max Performance]
[Enabled]
[Disabled]
[ 0]
[28]
[ 0]
[Enabled]
[Enabled]
[Nominal]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Short]
[C7s]
[Long]
[C1 and C3]
[C1 and C3]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
Select Item +/- Change Values
Select Menu Enter Select
Selection
Disabled
Enabled
Max Performance
Max Battery
Auto
Disabled
Enabled
Disabled
Enabled
0, 1,2,...200
KTQM87/mITX Users Guide
Item Specific Help
Enable processor performance states
(P-States).
F9 Setup Defaults
Sub-Menu F10 Save and Exit
►
Description
Enable processor performance states (P-States).
Select the performance state that the BIOS sets
before OS handoff.
Enable processor Turbo Mode. EMTTM must also
be enabled.
Enable/Disable Locking of turbo settings. When
Enabled, TURBO_POWER_LIMIT MSR will be
locked and a reset will be required to unlock the
register.
Turbo Mode Long Duration Power Limit (aka
Power Limit 1) in Watts. The value may vary from
0 to Fused Value. If the value is 0, the fused
value will be programmed. A value greater than
fused TDP value will not be programmed.
BIOS - Advanced
Continue