Kontron KTQM87/mITX User Manual page 12

KTD-N0886-E
Hardware •
Smart Fan control system, support Thermal® and Speed® cruise for two on-board
Monitor Fan connectors: CPU Fan (on-board) and System Fan (on-board)
•
Subsystem
Thermal inputs: CPU Die temperature (precision +/- 3ºC), System temperature
(precision +/- 3ºC)
•
Intrusion (Case Open) detect input, (via Feature connector)
•
Sleep S5# Indication, (via Feature connector)
•
System Powergood Signal, (via Feature connector)
Power ATX/BTX (w. ATX+12V) PSU, 24-pin and 4-pin
Supply Unit
Battery
Exchangeable 3.0V Lithium battery for on-board Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR-2032L/BN, CR2032N/BN or CR-2032L/BE.
Approximate 6.2 years retention.
Current draw is less than 4.2µA when PSU is disconnected and 0 µA in S0 – S5.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer. Dispose of
used batteries according to the manufacturer's instructions.
BIOS •
Phoenix BIOS (EFI core version)
•
Support for ACPI 3.0 ( Advanced Configuration and Power Interface), Plug & Play
•
•
•
•
"Always On" BIOS power setting
•
RAID Support (RAID modes 0,1, 5 and 10)
•
Operating •
Windows XP (32b*, limited support may apply)
Systems •
Windows 7 (32b + 64b *)
Support
•
Windows 8 (32b + 64b *)
•
Linux
•
VxWorks
•
WES7 (32b + 64b)
*= Out Of The Box installation test only.
Page 10
Suspend (S1 mode)
Suspend To Ram (S3 mode)
Suspend To Disk (S4 mode)
KTQM87/mITX Users Guide
System Specification