Kontron KTQM87/mITX User Manual page 11

Table of Contents

Advertisement

KTD-N0886-E
Audio
Audio, 7.1 Channel High Definition Audio Codec using the VIA VT1708S codec
Line-in and Line-out
Surround output: SIDE, LFE, CEN, BACK and FRONT
Microphone: MIC1 and MIC2
SPDIF-Out (electrical Interface only)
On-board speaker (Electromagnetic Sound Generator like Hycom HY-05LF)
Video
Intel ® i3, i5 & i7 4
3x digital display ports via the Intel® Haswell CPU:
3x DP (DisplayPorts), comply with DisplayPort 1.2 specification.
HDMI panel support via DP to HDMI Adapter Converter.
DVI panel support via DP to DVI Adapter Converter.
VGA panel support via DP to VGA Adapter Converter.
LVDS panel support up to 2 pixel/clock 24 bit colors (VESA and JEIDA)
Triple independent pipes for Mirror or Triple independent display support
Triple independent pipes for triple independent or cloned displays are supported
from OS. Any 3 displays via DP1, DP2, DP3 and LVDS can be used.
I/O Control
Via ITE IT8516E Embedded Controller via LPC Bus interface
Peripheral
Four USB 3.0 / USB 2.0 on I/O area
interfaces
Four USB 2.0 ports on internal pinrows
Two Serial ports (RS232) on internal pinrows
Four Serial ATA-600 (Two further SATA ports implements in mSATA connectors)
RAID 0/1/5/10 support
LAN Support
1x 10/100/1000Mbits/s LAN (ETHER1) using Intel® Clarksville WGI218LM Gigabit
PHY connected to QM87 supporting AMT 9.0
1x 10/100/1000Mbits/s LAN (ETHER2) using Intel® Pearsonville I211AT PCI Express
controller
PXE Netboot supported.
Wake On LAN (WOL) supported
Expansion
PCI-Express slots:
Capabilities
SMBus, compatible with ACCES BUS and I2C BUS, (via Feature connector)
SPI bus routed to SPI connector (BIOS Recovery module interface)
DDC/AUX Bus routed to DP connector (Auto detect to DDC when using passive DP to
HDMI or DVI adapters)
18 x GPIOs (General Purpose I/Os), (via Feature connector)
DAC, ADC, PWM and TIMER (Multiplexed), (via Feature connector)
WAKE UP / Interrupt Inputs (Multiplexed), (via Feature connector)
3 Wire Bus for GPIO Expansion (up to 152 GPIOs), (via Feature connector)
8 bit Timer output, (via Feature connector)
Page 9
rd
Generation Mobile processors support Intel ® HD Graphics 4600.
Slot PCIex16 (Gen 2.0 & 3.0).
Support PEG Bifurcation 1x x16 (default) or 2x x8 or 1x x8 + 2x x4.
1x mPCIe/mSATA connector with USB 2.0 port
1x mPCIe/mSATA connector w.USB 2.0, support for 3G modem (SIM socket)
KTQM87/mITX Users Guide
System Specification

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents