Usb Connector 10/11 (Usb10/11) (J11); Usb Connector 12/13 (Usb12/13) (J12) - Kontron KTQM67/Flex User Manual

KTD-N0819-E

6.6.3 USB Connector 10/11 (USB10/11) (J11)

USB Ports 10 and 11 are supplied on the internal USB10/11 pinrow connector J11.
Note Type
1
Signal Description
USB10+ USB10-
Differential pair works as Data/Address/Command Bus.
USB11+ USB11-
5V supply for external devices. SB5V is supplied during powerdown to allow
5V/SB5V wakeup on USB device activity. Protected by resettable 1A fuse covering both USB
ports.

6.6.4 USB Connector 12/13 (USB12/13) (J12)

USB Ports 12 and 13 are supplied on the internal USB12/13 pinrow connector J12.
Note Type
1
Signal Description
USB12+ USB12-
Differential pair works as Data/Address/Command Bus.
USB13+ USB13-
5V supply for external devices. SB5V is supplied during powerdown to allow
5V/SB5V wakeup on USB device activity. Protected by resettable 1A fuse covering both USB
ports.
Note 1: In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
Page 48
Signal PIN
PWR 5V/SB5V 1 2
IO USB10- 3 4
IO USB10+ 5 6
PWR GND 7 8
NC KEY 9 10
Signal PIN
PWR 5V/SB5V 1 2
IO USB12- 3 4
IO USB12+ 5 6
PWR GND 7 8
NC KEY 9 10
Internal Connectors
Signal Type Note
5V/SB5V PWR 1
USB11- IO
USB11+ IO
GND PWR
NC NC
Signal Type Note
5V/SB5V PWR 1
USB13- IO
USB13+ IO
GND PWR
NC NC
KTQM67 Users Guide