Kontron KTQM87/mITX User Manual page 62

KTD-N0886-E
Function
Long Power Limit Time
Short Power Limit
Short Duration Turbo mode
Energy Efficient Enable
Configure TDP Boot Mode
Lock TDP Setting
TDP Custom Setting
C-States
Extend C-States
C3-State
C6-State
C6 Latency
C7-State
C7 Latency
C-State Auto Demotion
C-State UnDemotion
Package C State Demotion
Package C State UnDemotion
C State Pre-Wake
Lake Tiny
Page 60
Selection Description
Long Duration Time Window (aka Power Limit 1
Time) value in seconds. The value may vary from
0,1... 28,...55,56
0 to 56. Indicates the time window over which
TDP value should be maintained. If the value is
0, the fused value will be programmed.
Turbo Mode Long Duration Power Limit (aka
Power Limit 2) in Watts. The value may vary from
0, 1, ... 32767 0 to Fused Value. If the value is 0, the fused
value will be programmed. A value greater than
fused TDP value will not be programmed.
Disabled
Enable Short Duration Turbo mode for processor.
Enabled
Disabled
Enable Energy Efficient for processor.
Enabled
Nominal Configure TDP Mode as [Nominal] [Up] [Down]
[Disabled] TDP selection. Disabled options will
Down
Up skip all cTDP boot configurations but dynamic
Disabled cTDP can still work.
Disabled
Lock TDP in MSR_CONFIG_TDP_CONTROL
Enabled
Disabled
Use TDP Custom Setting.
Enabled
Disabled
Enable processor idle power saving states (C-
Enabled States).
Disabled Enable C-State transitions to occur in
Enabled
combination with P-States.
Disabled
Enable processor idle power saving C3 state.
Enabled
Disabled
Enable processor idle power saving C6 state.
Enabled
Short
Configure Short/Long Latency.
Long
Disabled
Enable processor idle power saving C7 state.
Enabled
Short
Configure Short/Long Latency.
Long
Disabled
C1
Configure C-State Auto Demotion.
C3
C1 and C3
Disabled
C1
Configure C-State Auto UnDemotion.
C3
C1 and C3
Disabled
Enable/Disable Package C State Demotion.
Enabled
Disabled
Enable/Disable Package C State UnDemotion.
Enabled
Disabled
Enable/Disable C State Pre-Wake.
Enabled
Disabled
Lake Tiny Settings.
Enabled
KTQM87/mITX Users Guide
BIOS - Advanced