Kontron KTQM87/mITX User Manual page 70

KTD-N0886-E
Dram Power Meter
Advanced
Use User provided power weights, scale factor
Energy Scale Factor
Idle Energy Channel0
PowerDown Energy Channel0
Activate Energy Channel0
Read Energy Channel0
Write Energy Channel0
Idle Energy Channel1
PowerDown Energy Channel1
Activate Energy Channel1
Read Energy Channel1
Write Energy Channel1
F1 Help ↑↓
Esc Exit ←→
Function
Use User provided power weights,
scale factor
Energy Scale Factor
Idle Energy Channel0/1
PowerDown Energy Channel0/1
Activate Energy Channel0/1
Read Energy Channel0/1
Write Energy Channel0/1
Page 68
Phoenix SecureCore Technology Setup
Dram Power Meter
Select Item +/-
Select Menu Enter
Selection
Disabled
Enabled
0,1, ...4,...7
0,1,...10,...63
0,1,...10,...63
0,1,... 172,...255
0,1,... 212,...255
0,1,... 221,...255
KTQM87/mITX Users Guide
Item Specific Help
[Enabled] Enable: User provided power
weights, scale factor and channel
[4] power floor values are used.
Disable: BIOS sets power weights,
[10] scale factor and channel power floor
[ 6] values based on DIMMs present in
[172] system.
[212]
[221]
[10]
[ 6]
[172]
[212]
[221]
Change Values F9
Select Sub-Menu F10
►
Description
Enable: User provided power weights, scale
factor and channel power floor values are used.
Disable: BIOS sets power weights, scale factor
and channel power floor values based on DIMMs
present in system.
Range[7;0] = [7.3pJ;931.3pJ]. The default reset
value is 3 = 116.4pJ.
Idle Energy consumed by DIMM for one clock
cycle when the DIMM is idle with cke on.
Range [63;0].
PowerDown Energy consumed by DIMM for one
clock cycle when the DIMM is idle with cke off.
Range [63;0].
Activate Energy contribution. Range [255;0].
Read Energy contribution. Range [255;0].
Write Energy contribution. Range [255;0].
BIOS - Advanced
Setup Defaults
Save and Exit