Kontron KTQM87/mITX User Manual page 54

KTD-N0886-E
Function
NumLock:
Timeout
CSM Support
Diagnostic Splash Screen
Diagnostic Summary Screen
BIOS Level USB
USB Legacy
Console Redirection
Allow Hotkey in S4 resume
UEFI Boot
Legacy Boot
Boot in Legacy Video Mode
Load OPROM
Note 1: Use either digit keys to enter value (0 – 99) or +/- keys to increase/decrease value.
Page 52
Selection Description
On
Select Power-on state for NumLock.
Off
Number of seconds that P.O.S.T will wait for the user
2 Note 1
input before booting.
Compatibility Support Module that provides backward
No
compatibility services for legacy BIOS services, like
Yes
int10/int13, dependent OS.
If you select 'Enabled' the diagnostic splash screen
Disabled
always displays during boot. If you select 'Disabled'
the diagnostic splash screen does not display unless
Enabled
you press HOTKEY during boot.
Disabled
Display the diagnostic summary screen during boot.
Enabled
Enable/Disable all all BIOS support for USB in order
to reduce boot time.
Note that this will prevent using a USB keyboard in
Disabled
setup or a USB biometric scanner such as a finger
Enabled
print reader to control access to setup, but does not
prevent the operating system for supporting such
hardware.
Enable/Disable USB BIOS SMM support for mouse,
Disabled
keyboard, mass storage, etc. in legacy operating
Enabled
systems such as DOS.
Disabled
Enable/Disable Universal Console Redirection.
Enabled
Disabled Enable hotkey detection when system resuming from
Enabled
Hibernate state.
Disabled
Enable the UEFI boot.
Enabled
Disabled
Enable the Legacy boot.
Enabled
Enable to force the display adapter to switch the
video mode to Text Mode 3 at the end of BIOS POST
Disabled
for non-UEFI boot mode (Legacy Boot). Some legacy
Enabled
software, such as DUET, requires that the BIOS
explicitly enter text video mode prior to boot.
All
Load all OPROMs or on demand according to the boot
On Demand
device.
KTQM87/mITX Users Guide
BIOS - Main