Clock 3 - Kontron KTQM87/mITX User Manual

KTD-N0886-E

Clock 3

Advanced
BLCK, DMI, PEG, PCIe
PCI33, SATA, USB3
Maximum supported frequency
Minimum supported frequency
Current supported frequency
New Frequency [10KHz]
Supported SSC modes
Current SSC mode
New SSC mode
Maximum supported SSC %
Current SSC %
New SSC spread percent [0.01%]
F1 Help ↑↓
Esc Exit ←→
Function
New Frequency [10KHz] (Note1)
New SSC mode
New SSC spread percent
[0.01%] (Note2)
Note 1: Use either digit keys to enter value or +/- keys to increase/decrease value by 1.
Do not use mix of digit keys and +/- keys.
Note 2: Use either digit keys to enter value or +/- keys to increase/decrease value by 1.
Do not use mix of digit keys and +/- keys.
Page 102
Phoenix SecureCore Technology Setup
Clock 3
[100.0 MHz]
[100.0 MHz]
[100.0 MHz]
[10000]
[down]
[down]
[down]
[0.50]
[0.50]
[50]
Select Item +/- Change Values
Select Menu Enter Select
Selection
3850-40000
Up
Center
down
0-50
KTQM87/mITX Users Guide
Item Specific Help
Frequency in 10KHz increments.
Frequency will be automatically
rounded to nearest valid value.
Allowed range is limited by Max/ Min
supported frequencies. Changes will
not be applied unless' Apply setting'
is pressed
F9 Setup Defaults
Sub-Menu F10 Save and Exit
►
Description
Frequency in 10KHz increments. Frequency will
be automatically rounded to nearest valid
value. Allowed range is limited by Max/ Min
supported frequencies. Changes will not be
applied unless' Apply setting' is pressed
Spread Spectrum Clocking mode.
Determines method of clock spectrum
distribution around base frequency. Changes
will not be applied unless 'Apply Setting' is
pressed.
Clock spectrum spread in 0.01% increments.
Determines spectrum deviation away from base
frequency. Allowed range is limited by Max
supported SSC%. Changes will not be applied
unless 'Apply Setting' is pressed.
BIOS - Advanced