Icc Configuration - Kontron KTQM87/mITX User Manual

KTD-N0886-E

ICC Configuration

Advanced
ICC Configuration
Use Watchdog Timer for ICC
Lock ICC registers
Clock Manupulation
Apply ICC settings after reboot
ICC Overclocking Library
Clock 1 – No Usage Defined
Clock 2 – No Usage Defined
►Clock 3
Clock 4 – No Usage Defined
Clock 5 – No Usage Defined
Clock 6 – No Usage Defined
Clock 7 – No Usage Defined
Clock 8 – No Usage Defined
F1 Help ↑↓
Esc Exit ←→
Function
Use Watchdog timer for ICC
Lock ICC registers
Apply ICC settings after reboot
Page 101
Phoenix SecureCore Technology Setup
[Disabled]
[Static Only]
[ICC Success]
[None]
[9.0.0.1209]
Select Item +/- Change Values
Select Menu Enter Select
Selection
Disabled
Enabled
Static only
All registers
None
Permanently after
reboot
KTQM87/mITX Users Guide
Item Specific Help
Enable Watchdog Timer operation for
ICC .If enabled , Watchdog Timer will
be started after ICC related changed .
This timer detects platform instability
caused by wrong clock settings.
F9 Setup Defaults
Sub-Menu F10 Save and Exit
►
Description
Enable Watchdog Timer operation for ICC .If
enabled, Watchdog Timer will be started after
ICC related changed. This timer detects
platform instability caused by wrong clock
settings
All registers: all ICC registers will be locked.
Static only – only static ICC registers will be
locked.
None:
Change will not apply
Permanent:
Changes will be applied permanently,
starting after the next reboot. Use it to provide
changes that are verified and safe.
BIOS - Advanced