Advertisement
FRAME/BODY PANELS/EXHAUST SYSTEM
METER PANEL (CBR300R/RA)
REMOVAL/INSTALLATION
Remove the upper cowl (page 2- 11
).
Disconnect the combination meter 20P connector [1]
.
Remove the meter panel [2] by releasing its bosses [3]
from the frame grommets [4].
Install the meter panel in the reverse order of removal.
METER PANEL STAY (CB300F/FA)
REMOVAL/INSTALLATION
Remove the upper cowl (page 2-11
).
Remove the clips [1] and bolt [2]
.
Remove the screws [3], combination meter wire 16P
connector (4] and combination meter (5].
Remove the right handlebar switch 9P(brown) connector [6], left handlebar switch 9P(black) connector [7] and
3P(black) connector [8].
[4]
[2]
2-13
Advertisement
