Advertisement
FUEL SYSTEM
[5]
7-14
AC type only:
Remove the PAIR control solenoid valve (page
7-24).
Remove the screw [1] and PAIR control solenoid valve stay [2].
Remove the Air cleaner cover screws [3] and element holder lid [4].
Remove the air cleaner element [5]
.
Loosen the band screw [6].
Remove the resonator [7] by releasing its tab [8] from the air cleaner cover [9] slit.
Disconnect the canister-to-EVAP purge control solenoid valve hose [10] from the canister [11].
Remove the screw [12], EVAP purge control solenoid valve [13] and stay [14].
Remove the canister from the air cleaner cover tabs.
Remove the following:
-
Air cleaner cover screws
-
Air cleaner cover
-
Packings [15]
-
Element holder [16]
-
Air cleaner case [17]
Assemble is in the reverse order of disassembly.
NOTE:
Make sure the packings are in good condition
,
replace them with new one if necessary.
TORQUE:
Air cleaner cover screw:
1.1 N·m (0.1 kgf·m, 0.8 lbf·ft)
[17]
Advertisement
