Advertisement
ST ARTER MOTOR
REMOVAL/INSTALLATION
With
the ignition
switch
OFF,
remove
the negative (-)
cable at the battery
before servicing the
starter motor.
Remove the bolts [1] and cable guide [2]
.
Disconnect the clutch cable [3] from the clutch lifter arm
[4]
.
Remove the cam chain tensioner lifter (page 11-9).
Release the rubber cap [1
].
Remove the starter motor terminal nut [2] and starter
''
motor cable [3]
.
Remove the stater motor mounting bolts [4] and ground
cable [5].
Remove the starter motor [6]
.
Remove the 0-ring [1].
Installation is in the reverse order of removal.
NOTE:
• Apply engine oil to a new 0 -ring.
Adjust the clutch lever freeplay (page 3-21
).
ELECTRIC ST ARTER
~/M
[1]
s
.
Iii
6-5
Advertisement
