Advertisement
Remove the water pump shaft bearings [1] using the
special tools.
TOOLS:
Remover weight [2]
07741-0010201
Bearing remover set, 12 mm [3] 07936-1660101
Remove the mechanical seal [1] and oil seal [2] from
the right crankcase
cover.
Apply grease to a new oil seal [1] lips.
Install the oil seal to the right crankcase cover as
shown.
Drive in
a
new
Drive in new bearings [1] into the right crankcase cover
bearing squarely
using the special tools as shown
.
with the marking
side facing up.
TOOLS:
Driver [2]
Attachment, 28 x 30 mm
[3]
Pilot, 12 mm [4]
077 49-0010000
07946-1870100
077 46-0040200
After installing the bearing
,
lubricate it with engine oil.
COOLING SYSTEM
8-13
Advertisement
