Left Crankcase Cover Installation; Starter Pinion - Honda Activa SCV110 Service Manual Digest

KICKSTARTER/DRIVE AND DRIVEN PULLEYS/CLUTCH
LEFT CRANKCASE COVER
INSTALLATION
Install the dowel pins (2 nos.) and apply liquid gasket.
Install the left crankcase cover and cable holder, and
tighten the bolts (8 nos.) in a crisscross pattern in 2 or 3
steps.
Install the rear brake cable in to the cable holder.
Connect the air duct to the left crankcase cover and tighten
the band screw (1 no.) securely.
After installation, check that the kickstarter pedal
operates properly.
Install the left floor side cover (page 2-5).
Install the pillion step cover.

STARTER PINION

REMOVAL
Remove the left crankcase cover (page 9-3).
Remove the starter pinion holder.
Remove the starter pinion.
9-8
DOWEL PIN
GASKET
BOLTS
LEFT CRANKCASE COVER
CABLE HOLDER
STARTER PINION
STARTER PINION
HOLDER