BEARING REPLACEMENT
LEFT CRANKCASE
Remove the final shaft bearing, counter gear shaft
bearing and drive shaft bearing using the special tools.
Be careful not to damage the left crankcase and
transmission case mating surfaces.
TOOLS:
Counter gear shaft bearing:
Bearing remover head, 12 mm
Bearing remover shaft, 12 mm 070MC – KPL-I410
Final shaft bearing:
Bearing remover head, 15 mm
Bearing remover shaft, 15 mm 070MC – KPL-I510
Drive shaft bearing:
Bearing remover head, 17 mm
Bearing remover shaft, 15 mm 070MC – KPL-I510
Apply engine oil to new bearing rotating areas.
Drive new bearings into the left crankcase.
TOOLS:
Counter gear shaft bearing:
Driver
Attachment, 32 x 35 mm
Pilot ,12 mm
Final shaft bearing:
Driver
Attachment, 37 x 40 mm
Pilot, 15 mm
Driveshaft bearing:
Driver
Attachment, 42 x 47 mm
Pilot, 17 mm
070MC – KPL-I400
070MC – KPL-I500
070MC – KPL-I520
070GD – 001-I100
070GD – 002-I140
070GD – 004-I130
070GD – 001-I100
070GD – 002-I150
070GD – 004-I140
070GD – 001-I100
070GD – 002-I160
070GD – 004-I150
FINAL REDUCTION
BEARING REMOVER
BEARING REMOVER
SHAFT
BEARING REMOVER
WEIGHT
PILOT
ATTACHMENT
DRIVER
10-5