Remove the engine mounting nut and pull out the
mounting bolt from the left side.
Remove rear shock absorber upper mounting bolt
(page 14-6).
Remove the engine from the frame.
Support the frame securely to prevent it from turning
over.
Check the engine mounting bracket for damage or
deterioration and replace if necessary.
If you want to remove the engine mounting bracket,
remove the engine mounting bracket nut and pull out the
mounting bolt from the left side.
Install the engine mounting bracket and mounting bolt.
Install and tighten the nut.
TORQUE: 69 N·m (7.0 kgf·m, 51lbf·ft)
ENGINE REMOVAL/INSTALLATION
ENGINE MOUNTING NUT
UPPER MOUNTING BOLT
BOLT
ENGINE MOUNTING BRACKET
NUT
6-3