Honda Activa SCV110 Service Manual Digest page 161

Install the return spring, inserting its end into the hole in
the brake panel.
Install the wear indicator plate on the brake cam, aligning
its wide tooth with the cam's wide groove.
Install the brake arm onto the brake cam, aligning the
punch marks on the arm and cam.
Install the brake arm bolt and nut, and tighten the nut.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Apply grease to the brake cam and the anchor pin.
• Contaminated brake linings reduce stopping power.
Keep grease off the brake linings.
• Wipe any excess grease off the brake cam and anchor
pin.
Install the brake shoes and springs.
Apply grease to the speedometer drive gear and install it,
Install the brake panel.
Install the front wheel (page 13-3).
FRONT WHEEL/BRAKE/SUSPENSION/STEERING
INDICATOR
RETURN SPRING
BRAKE ARM
RETURN SPRING
ALIGN
ALIGN
NUT
BOLT
BRAKE SHOES
SPRINGS
SPEEDOMETER DRIVE GEAR
13-11