Honda Activa SCV110 Service Manual Digest page 142

ALTERNATOR
Clean any oil or grease from the tapered portion of the
crankshaft and the tapered hole in the flywheel.
Install the flywheel on the crankshaft by aligning its groove
with the woodruff key.
Install the flywheel nut (1 no.).
Hold the flywheel with the universal holder and tighten
the nut.
TOOL:
Universal holder
TORQUE: 39 N·m (4.0 kgf·m, 29 lbf·ft)
Install the cooling fan and tighten the bolts (3 nos.).
NOTE:
Bolts other than actual can damaged the stator coil
windings.
Install the fan cover and tighten the screws (2 nos.).
Install the fan cover bolts (2 nos.) and tighten them.
TORQUE: 0.8 N·m (0.08 kgf·m, 0.6 lbf·ft)
Connect the alternator (wire) connectors.
Lift down the body cover.
11-4
070MB – KPL-I100
UNIVERSAL HOLDER
COOLING FAN
BOLTS
BOLTS
LIGHTING COIL LINE
CONNECTOR
WIRE BAND
PULSER COIL
CONNECTOR
LIGHTING COIL LINE
CONNECTOR
FLYWHEEL NUT
SCREWS
FAN COVER
EXCITER COIL
LINE CONNECTOR