Front Brake; Brake Panel Disassembly - Honda Activa SCV110 Service Manual Digest

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Install the brake arm joint into the brake arm.
Install the brake cable through the brake panel and to the
brake arm.
Install the brake adjusting nut.
Adjust the front brake lever free play (page 3-13).
Install the front fork cover and tighten the screw (1 no.) to
specified torque.
TORQUE: 4 N·m (0.4 kgf·m, 2.9 lbf·ft)

FRONT BRAKE

Remove the front wheel (page 13-3).
Remove the brake panel.
• A contaminated brake drum or shoe reduces
stopping power. Discard contaminated shoes and
clean a contaminated drum with a high quality brake
degreasing agent.
• Inhaled asbestos fibers have been found to cause
respiratory disease and cancer. Never use an air
hose or dry brush to clean brake assemblies. Use
a vacuum cleaner or alternate method to minimize
the hazard caused by air borne asbestos fibers.
INSPECTION
BRAKE DRUM
Measure the brake drum I.D.
SERVICE LIMIT: 131 mm (5.16 in)

BRAKE PANEL DISASSEMBLY

Remove the speedometer drive gear from the brake panel.
Check for any wear and damage.
13-8
BRAKE ARM JOINT
ADJUSTING NUT
FRONT FORK COVER
AXLE BOLT
BRAKE ARM
BRAKE ARM JOINT
ADJUSTING NUT
SPEEDOMETER DRIVE GEAR
SCREW
BRAKE CABLE