Installation And Wiring - Hitachi P1-00080-L Basic Manual

Chapter 2
Chapter 2

Installation and Wiring

2.1 Check the Inverter
Check the contents in the package, and confirm the
inverter model with a specification label.
Inverter
The model of the product is as follows:
E.g.: 200V class input voltage for Japan
Applicable motor capacity for ND rating is 3.7kW
ND rated current 17.5A
LD rated current 19.6A
VLD rated current 22.8A
00228
P1 -
(2) (3)
(1) Series name P1
(2) Motor maximum rated current (at VLD rated current
00001: 0.1A to 99999: 9999.9A
(3) Input power specification
L: three-phase 200V class;
H: three-phase 400V class
(4) Panel
B: no operator keypad equipped;
F: panel equipped
(5) Region (None): Japan;
E: Europe/Southeast Asia;
U: North America;
C: China

In case of (None), blank field is omitted.
(6) Integrated noise filter
F: integrated noise filter equipped;
CB: conduit box equipped

When both F and CB are equipped, it is indicated as
FCB.
•
Specification label example
Description example for P1-00228-LFF
(*) means eigenvalues
Inverter model
Input ratings
(Frequency/voltage/No. of
phases/Current)
Output ratings
(Frequency/voltage/No. of
phases/Rate current)
MFG No.; factory serial No.
Basic Guide
(This document)
- L F F
(4) (5) (6) (6)
Wire separation plate
SJ series type P1
Model: P1-00228-LFF
Input/Entrée:50Hz,60Hz 200–240V 3ph 27.1/23.3/20.8A
Output/Sortie:0-590Hz 200–240V 3ph 22.8/19.6/17.5A
MFG No. 62AA****** BB001

Configuration and description contents vary
depending on the model.
Refer to User's Guide for more details.

If optional products are included with shipment,
optional instruction will be enclosed.
Functional Safety
Guide

P1-00228-LFF example illustration in below.
Optional slots
 Refer to each optional product
instruction for detail.
Operator keypad
USB (Micro-B)
Control circuit
terminal block
Backing plate
Terminal block
cover
INVERTER
Hitachi Industrial Equipment
MADE IN JAPAN
Systems Co., Ltd.
2-1
Installation and Wiring
Eye bolts for hanging the inverter

P1-01850L/-00930H or above
(enclosed in the package)
Heat sink
Main circuit
terminals
Specification label
Ver.2.00
Date:****
NE18361-***