Hitachi P1-00080-L Basic Manual page 51

Chapter 4
4.1.3.1. Parameter setting screen
Change the parameter.
RUN
FW
Output frequency
FA-01
Set Speed-M (Keypad)
Menu oFW
Press the SEL (O) key.
An area in the screen will be highlighted.
RUN
FW
Output frequency
FA-01
Set Speed-M (Keypad)
Menu oFW
With UP/DOWN ( ) keys select either parameter or
monitor area then will be highlighted.
If SEL (O) key is pressed, the parameter code can be
changed.
RUN
FW
Output frequency
FA-01
Set Speed-M (Keypad)
Back oFW
Using UP/DOWN/LEFT/RIGHT (
code to be monitored can be changed, pressing again the
SEL (O) key give access to the function parameter. Press 1
key to return back.
M1
H03
29.51 Hz
29.51 Hz
29.51
Option
M1
H03
29.51 Hz
29.5
1 Hz
29.51
Option
M1
H03
29.51 Hz
29.5
1 Hz
29.51
Option
) keys the function
For parameter configuration
・In the case of a numerical value:
RUN
FW
Output frequency
FA-01
Set Speed-M (keypad)
Back oFW
With UP/DOWN/LEFT/RIGHT (
change the parameters value,
And then press the SEL (O) key to save the changes.
・In the case of a selection menu:
The upper area of the display shows the selected
function description.
RUN
FW
AA111
RUN command selection_M1
00:[FW]/[RV] terminal
01:3-wire
02:Keypad's RUN key
03:RS485
Back oFW
With UP/DOWN (
the available choices.
And then press the SEL (O) key to save the changes.
4-3
M1 H03
29.51 Hz
39.51 Hz
29.51
----
) keys
M1
H03
29.51
----
) keys you can move between