Default Gateway; Static Route - Tenda DH301 User Manual

Wireless N300 ADSL2+ High Power Modem Router

Default Gateway

Default gateway interface list can have multiple secondary WAN interfaces served as system default gateways but only
one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN
interface is connected. Priority order can be changed by removing all and adding them back in again.
Selected Default Gateway Interfaces: Displays the selected default gateway interfaces. Select a WAN interface and
click the button to move it to the Available Routed WAN Interfaces box.
Available Routed WAN Interfaces: Displays the available routed WAN interfaces. Select a WAN interface and click the
button to add it to the Selected Default Gateway Interfaces box.
Apply/Save: Click it to save and activate your settings.

Static Route

Static routes provide additional routing information to your router. Typically, you do not need to add static routes.
However, when there are several routers in the network, you may want to set up static routing. Static routing determines
the path of the data in your network. You can use this feature to allow users on different IP domains to access the Internet
via this device. It is not recommended to use this setting unless you are familiar with static routing. In most cases,
dynamic routing is recommended, because this feature allows the router to detect the physical changes of the network
layout automatically. If you want to use static routing, make sure the router's DHCP function is disabled.
102