Table of Contents
Advertisement
Wireless N300 ADSL2+ High Power Modem Router
IP over Ethernet (IPoE)
If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask
and the gateway IP address, you need to select the IP over Ethernet (IPoE).
IPv4
Step 1: Click Advanced Setup > WAN Service and then click the Add button.
Step 2: Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next.
Step 3: Select IP over Ethernet as WAN service type. Edit the Enter Service Description. This field is optional. We
recommend that you keep the default. Select a network protocol: IPv4 Only. And then click Next.
71
Hide quick links:
Advertisement
Table of Contents
