Install The Device - Tenda DH301 User Manual

DC
ON/OFF

2.2 Install the Device

Connect the included power adapter to your router and turn on the router.
①
Connect your computer to your router.
②
Connect your router to the Internet. Choose ADSL Mode or ETH Mode according to your actual Internet service
③
type.
ADSL Mode
(Phone cable access)
ETH Mode
(Ethernet cable access)
Used to connect to the power adapter, which is included in the package.
Power switch to turn the router on or off.
With a telephone Simply connect the DSL line to the DSL port of your router.
Use the splitter as a medium:
1) Connect the DSL line from the Internet side to the LINE port of
the splitter;
Without a telephone 2) Connect the telephone with a phone cable to the PHONE port of
the splitter;
3) Connect the MODEM port of the splitter and DSL port of your
router via another phone cable.
Do not go to Step 3 (connect the Ethernet cable to the LAN/WAN port) until you finish the
Primary Setup of Internet connection type on the Web Management Homepage, i.e., finish
settings in Ethernet Mode in
Wireless N300 ADSL2+ High Power Modem Router
Chapter 3 Quick Internet Setup >3.2 Internet Setup.
5