Tenda DH301 User Manual page 107

Wireless N300 ADSL2+ High Power Modem Router
Click Add to enter the following screen:
IP Version: Select IPv4 or IPv6.
Destination IP address/prefix length: Enter the destination IP address and prefix length of the final destination.
Interface: Select an interface from the drop-down list.
Gateway IP Address: Enter the gateway IP address, which must be a router on the same LAN segment as the router.
Metric: Enter a number in the Metric field. This stands for the number of routers between your network and the
destination.
Apply/Save: Click it to apply and save your settings.
Note
1. Destination IP address cannot be in the same IP segment as WAN or LAN segment of the router.
2. Only configure additional static routes for unusual cases such as multiple routers or multiple IP subnets located on
your network. Wrong static routes may lead to network failure.
103