Advanced Setup; Layer2 Interface - Tenda DH301 User Manual

4.1.6 DHCP
Here you can view the DHCP leases, including IP and MAC addresses of the PCs, hostnames and remaining lease time
as seen in the screenshot:

4.2 Advanced Setup

4.2.1 Layer2 Interface

Click Advanced Setup > Layer2 Interface to enter the Layer2 Interface screen.
This router provides two Layer2 Interfaces:
- ATM Interface for ADSL broadband Internet service. (By default, system applies the ATM Interface [ADSL uplink].)
- ETH Interface for connecting to the Internet via an Ethernet cable.
If you directly connect to the ADSL line via a phone cable, first refer to

to To Set up WAN Service for ATM
If you connect to the Internet via a fiber/cable modem using an Ethernet cable, first refer to

interface and then skip to
Interface.
To Set up WAN Service for ETH
Wireless N300 ADSL2+ High Power Modem Router
To Set up the ATM interface
Interface.
15
and then skip
To Set up the ETH