Table of Contents
Advertisement
4.2.5 Security
This section explains the following information:
•
IP Filtering
•
MAC Filtering
IP Filtering
Outgoing IP Filtering Setup
By default, all outgoing IP traffic from LAN is allowed, but some IP traffic can be BLOCKED by setting up filters.
Choose Add or Remove to configure outgoing IP filters.
Choose Add to enter the following screen:
This screen allows you to create a filter rule to identify outgoing IP traffic by specifying a new filter name and at least
one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. Click
'Apply/Save' to save and activate the filter.
Filter Name: Enter a descriptive filtering name.
IP Version: Select the IP version that the filter rule supports. Here is IPv4.
Wireless N300 ADSL2+ High Power Modem Router
95
Hide quick links:
Advertisement
Table of Contents
