Table of Contents
Advertisement
Server page that the UPnP interface is being used.
Application Scenario:
You have set up one web server on the LAN. Web server——IP: 192.168.1.50, TCP port: 8090.
Now you hope friends on the Internet can access your web by Port 10480 through WAN port. WAN
port——ipoe_eth0.1, IP: 1.2.3.4
Configuration Steps:
Click Advanced Setup > NAT > Virtual Server to enter it and then click the Add button.
Select the WAN interface ipoe_eth0/eth0.1 here.
Input the word web in the Custom Service field. Then manually enter the port number 10480 in the External Port
Start and External Port End fields, and enter the port number 8090 in the Internal Port Start and Internal Port End
fields. Actually port in the Internal Port End filed follows the port number in the Internal Port Start field
automatically.
Select a protocol from the Protocol drop-down list. If you are unsure, select TCP/UDP.
In the Server IP Address field, enter the IP address of the web server: 192.168.1.50.
Click Apply/Save to save the configuration.
Wireless N300 ADSL2+ High Power Modem Router
91
Hide quick links:
Advertisement
Table of Contents
