Table of Contents
Advertisement
User Guide
6 Tools
6.1 Reboot
Reboot the device to activate your settings. WAN connection will be disconnected during reboot.
6.2 Restore to Factory Default
Click the Restore to Factory Default button to reset device to factory default settings. You need to reconfigure the device for Internet access as
well as many other settings including wireless settings.
The factory default settings are listed below:
IP Address: 192.168.0.1
Subnet mask: 255.255.255.0
Note:
To activate your settings, you need to reboot the device after you reset it.
6.3 Backup/Restore
Backup: Once you have configured the device the way you want it, you can save these settings to a configuration file on your local hard drive
that can later be imported to your device in case that the device is restored to factory default settings. To do so, follow below instructions:
1. Click the Backup button and specify a directory to save settings on your local hardware.
2. Click OK to save the configuration file.
.
36
Advertisement
Table of Contents
