Tenda DH301 User Manual page 63

Wireless N300 ADSL2+ High Power Modem Router
Step 8: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set.
Step 9: IPoA WAN service setup parameter is shown as below.
To Set up WAN Service for ETH Interface
Three Internet connections: PPP over Ethernet (PPPoE), IP over Ethernet (IPoE) and Bridging are available in the
Ethernet uplink mode.
If you selected and configured the ETH Interface (Ethernet uplink), follow steps below to configure the WAN service:
Tip
eth0, eth1, eth2 and eth3 respectively represent the LAN port1, LAN port2, LAN port3 and LAN port4 of the device.
59