Table of Contents
Advertisement
User Interface: Select the WAN interface you will use to visit the server in your LAN.
Configure the Service Name > Select a Service to select an existing service (Select One here is only an express to
tell you select one service.) from the drop-down list. And then the corresponding external/internal start/end port will
Or configure Service Name > Custom Service to customize a service manually.
prompt automatically
.
Server IP Address: Enter the IP address of your local computer that will provide this service.
Click Apply/Save to save configurations.
Other fields' introduction that may help:
External Port Start/External Port End: Server ports provided for Internet users to accessing the LAN.
Protocol: Select the protocol from the Protocol drop-down list. If you are unsure, select TCP/UDP.
Internal Port Start/Internal Port End: The ports used by the server in the LAN.
After all the configurations, visitors on the Internet can access your server by simply using "Protocol Name://WAN IP
address: External Port".
Note
If UPnP feature on the router and some applications of the connected PC is enabled, you will be prompted on the Virtual
Wireless N300 ADSL2+ High Power Modem Router
90
Hide quick links:
Advertisement
Table of Contents
