Inserting Rewind Shafts - Gfp 563TH Operating Manual

17. Inserting rewind shafts

1. Slide a cardboard core onto the rewind shaft
2. Rotate the locking outer sleeves on both sides of the machine to the open position
3. Align the arrow and shaft tongue with the slot in support bracket on one side
4. Do the same for the opposite side support bracket
5. Rotate both locking outer sleeves to the closed position on the support brackets
18. Feed tray safety latch
1. A Feed Tray Safety latch rotates freely with the feed tray
2. Ensure latch is in the locked position whenever the feed tray is rotated to the up position
19. Removing Press Roller Assembly
1. Unscrew knurled thumb screw securing left side of Press Roller assembly
2. Lift off and remove Press Roller assembly
Safety Latch
18